Dremel

Dremel 587 - 3/32 inch Collet, Open Package Used to hold Bits with a 3/32 inch shank Dremel 587 but not in retail packaging For use with Dremel Heavy Duty Flex Shaft Tools

Dremel 442-02 - 2pc Carbon Steel CUP Brush 1/8 inch shank 2 brushes per package Comes in original packaging For use in Dremel rotary tools Well suited for cleaning flat surfaces and getting...

Dremel US510 Ultra-Saw Metal Cut-off Wheel - 60 Grit Dremel US510 Sold four wheels per shrink wrapped package 60 Grit 3 1/2 inches in diameter 0.049 inch thick 11.1mm / 7/16 inch hole...

Dremel Square End Cylinder Tungsten Carbide Cutter Dremel 9901 1/8 inch diameter cylinder 1/8 inch shank High-speed tungsten carbide cutter Tungsten carbide is the hardest material next to...

Compare to Dremel 428 Carbon Steel Wheel Brush About 3/4 inch wheel diameter, but size may vary 1/8 inch shank diameter Ideal for cleaning and removing rust and corrosion Use on brass,...

Compare to Dremel 428 Carbon Steel Wheel Brush - Open Package - SECONDS These are seconds because the bristles are bent a little, but they still work great 3/4 inch wheel diameter Most are nicer...

Dremel 400 XPR Carbon Armature Motor Brush and Spring Set, 2pc Dremel 90937 2 piece set For Dremel model 400 XPR; not included

Dremel 100 - Round Ball Cutter 1/4 inch Round Ball Cutter 1/8 inch shank A versatile, high quality cutter made of high grade steel For use with Dremel rotary tools Use for shaping, hollowing,...

2pc Dremel ROUND Engraving Cutters, 1/32 inch Dremel 105 2 per package 1/32 inch diameter 1/8 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics,...

2pc Dremel Round Engraving Cutter, 1/16 inch Dremel 106 2 per package 1/16 inch diameter ball 1/8 inch shank For use in Dremel rotary tools Ideal for detail engraving, carving and...

2pc Dremel ROUND Engraving Cutter, 3/32 inch Dremel 107 2 per package 3/32 inch diameter ball 1/8 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics,...

Dremel Inverted Cone Engraving Cutter, 1/32 inch Dremel 108 1/32 inch diameter inverted cone cutter 1/8 inch shank A versatile, high quality cutter made of high grade steel Ideal for detail...

Dremel Inverted Cone Engraving Cutter, 1/16 inch Dremel 109 1/16inch diameter inverted cone 1/8 inch shank A versatile, high quality cutter made of high grade steel Ideal for detail engraving,...

Dremel INVERTED CONE Engraving Cutter Dremel 110 5/64 inch diameter inverted cone 1/8 inch shank A versatile, high quality cutter made of high grade steel Ideal for detail engraving, carving...

Dremel Needle Engraving Cutter, 1/32 inch Dremel 111 One per package 1/32 inch diameter tip 1/8 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics,...

Dremel NEEDLE Engraving Cutter, 1/16 inch Dremel 113 1/16 inch diameter 1/8 inch shank For use in Dremel rotary tools Maximum 35,000 RPM Ideal for detail engraving, carving and routing Use...

Dremel 114 - 5/16 inch Round Ball Cutter 5/16 inch Round Ball Cutter 1/8 inch shank A versatile, high quality cutter made of high grade steel For use with Dremel rotary tools Use for shaping,...

Dremel 115 Cylinder High Speed Steel Cutters 2 cutters per package 5/16 inch diameter cylinder shaped cutter 1/8 inch shank A versatile, high quality cutter made of high grade steel Ideal for...

Dremel 116 Inverted Cone Cutter High Speed Steel 1/4 inch diameter inverted cone cutter 1/8 inch shank A versatile, high quality cutter made of high grade steel Inverted cone shape is used to...

Dremel 117 - 2pc 1/4 inch Round End Cone High Speed Steel Cutter Each package includes two cutters 1/4 inch diameter round end cone shaped cutter 1/8 inch shank 35,000RPM Maximum A versatile,...