HAWK

HAWK

  • Out of stock

    5pc Small Part Drying Strip with Suction Cups

    HAWK

    $3.79
    Small Part Drying Strip 5 clips Strip is about 12 inches long with clear suction cups on either end Alligator clips hang down from the strip Clip onto small parts for drying, painting,...
    BBE48-D152
    $3.79
  • 5pc Tweezer Set Non-Magnetic 5 inch

    HAWK

    $5.97
    5pc Non-Magnetic Tweezers Set 5 piece set 5 1/2 inch sharp point slim tweezers 4 3/4 inch sharp tip tapered tweezers 4 3/4 inch blunt tip visibility tweezers 4 3/4 inch medium tip visibility...
    BAN25
    $5.97
  • 6 in 1 Hammer

    HAWK

    $5.97
    6 in 1 Hammer with Interchangeable Heads 6 interchangeable heads 1 Annodized aluminum handle Approximately 7 1/4 inches long Heads are a little less than 1/2 inch diameter Flat brass head Flat metal...
    SDB4-PH600
    $5.97
  • Ball Peen Hammer - 1oz

    HAWK

    $3.97
    1 Ounce Ball Peen Hammer About 8 inches overall The head is about 2 1/16 inches Ball is about 5/16 inch in diameter Peen is about 5/16 inch in diameter
    BDG19-PH101
    $3.97
  • Ball Peen Hammer - 2oz

    HAWK

    $3.97
    2 ounce ball peen hammer 9 inches long overall Hammer head is about 2 1/2 inches wide Ball is about 3/8 inch in diameter Peen is about 3/8 inch in diameter Wood handle
    BER19
    $3.97
  • Ball Peen Hammer - 4oz - Premium

    HAWK

    $7.97
    Premium 4oz Ball Peen Hammer Drop forged dual head Hammer is about 9 3/4 inches long overall The head is about 2 1/2 inches wide Ball is about 5/8 inch in diameter Peen is about 5/8 inch in...
    SAC2-PH100HA
    $7.97
  • Bench Grinder Diamond Dressing Tool

    HAWK

    $8.97
    Bench Grinder Diamond Dressing Tool 36 grit Diamond area is about 1/2 inch x 1 3/4 inch 4 5/16 inch long overall Used for dressing, cleaning, and shaping bench grinder wheels
    SGN2-TJ7525
    $8.97
  • Brass Ball Peen Hammer - 4 ounce

    HAWK

    $7.97
    4oz Brass Ball Peen Hammer Hammer is about 10 1/2 inches long overall 4 ounce head Wood handle Brass hammers are non-sparking and softer than steel hammers Use for working with ferrous and...
    BET25-PH204
    $7.97
  • Combination inch and mm Bore Gauge

    HAWK

    $2.97
    Combination Bore Gauge Measures bores, holes, cylinders up to 5/8 inch (16mm) in diameter Inch increments are .005 inch Metric increments are .1mm The marks are etched into the stainless steel
    BDF80
    $2.97
  • Ellipse / Oval Drawing Template

    HAWK

    $1.97
    Ellipse / Oval Drawing Template Draw 27 ovals/ellipses from 2mm to 50mm 190mm ruler Template has holes to allow it to be hooked into a three ring binder Template is made of flexible plastic
    BBS46-ART-SH02E
    $1.97
  • Hand Vise - Hollow Handle

    HAWK

    $4.97
    Hand Vise - Hollow Handle Spring action jaws are about 1/2 inch wide Hole goes all the way though handle 5 inches long overall Handle is about 3/8 inch diameter Jaws open 1/8 inch Opening in...
    BBL32-TJ7150
    $4.97