Bead Reamers

Bead Reamers

  • 1/16 x 7/8 inch Diamond Bead Reamers - 10pc

    SE

    $3.97
    10pc 1/16 inch Diamond Bead Reamer 10 piece set 1/16 x 7/8 inch rat-tail bead reamer 1/8 inch shank 2 inch overall in length Approximately 0.0195 inch at the very tip Diamond coated accessories will cut into glass, wood, metal, stone, practically...
    BDH58-DF83510
    $3.97
  • 1/8 x 9/16 inch Cone Diamond Burr - 6pc

    SE

    $2.97
    6pc Cone Diamond Burr 6 piece set 1/8 x 9/16 inch Cone 1/8 inch shank There is some variation in the sizes of these Diamond coated accessories will cut into glass, wood, metal, stone, practically anything For longer life, use with a cooling agent...
    D-EE02
    $2.97
  • 10pc 1/16 x 1 3/16 inch Diamond Bead Reamers

    SE

    $5.49
    10pc Diamond Bead Reamers, 1/16 x 1 3/16 inch 10 piece set 1/16 x 1 3/16 inch rat-tail bead reamer 1/8 inch shank Approximately 0.018 inch at the very tip 2 3/4 inches long overall Diamond coated accessories will cut into glass, wood, metal,...
    BDM94
    $5.49
  • 3pc Diamond Bead Reamer Set

    SE

    $2.97
    3pc Diamond Bead Reamer Set 3 piece set 7/32 inch cone 7/32 inch pointed cylinder 1/16 inch tapered Measurements are at the largest diameter of the reamer Plastic handles Handle colors may vary Use to smooth or enlarge holes in beads
    BBH11
    $2.97
  • 4pc Diamond Bead Reamer Set

    SE

    $3.97
    4pc Bead Reamer Set, Diamond Coated 4 piece set 3/16 inch cone 3/16 inch pointed cylinder 1/16 inch tapered 1/8 inch tapered Measurements are at the largest diameter of the reamer Plastic handles Handle colors may vary Use to smooth or enlarge...
    BDG22-DF83554
    $3.97
  • 5pc Deluxe Diamond Bead Reamer Set

    SE

    $4.97
    Deluxe 5pc Diamond Bead Reamer Set 5 piece set  Deluxe wood handle accepts the interchangeable bead reamers 1/8 inch to point 1/16 inch to point 1/4 x 1/2 inch cone  3/16 x 3/8 inch pointed end cylinder Actual bits may vary & sizes...
    SDE3-83555
    $4.97
  • Reamer/Graver Sharpening Jig

    SE

    $3.97
    Reamer/Graver Sharpening Jig Designed to help you get the sharpening angle you want on small rods, reamers and gravers Jig is about 1 1/2 inches tall by 1 3/16 inches wide This is a very small jig Aluminum body
    BDF66
    $3.97