Clamps

12pc Steel Spring Clamps 12 piece set About 2 inches long overall Jaws are about 3/8 inch wide Jaws open about 3/4 inch Metal clamps with a black finish Plastic dipped jaws and grips Use to clamp small parts on projects RC Cars, Models,...

Plastic Tarp Clips 12 pieces 3 1/4 inches long Jaws open 1/2 inch Jaws are 1 inch wide Attach to a tarp or any similar type of material Use in place of missing grommets Hole for bungee cord, rope or tie downs Serrated jaws tightly lock into...

12pc Black Mini Spring Clamp Set 12 piece Set  These Spring Clamps are 3 1/2 inches overall in length Jaws of the clamps open about 1.5 inch wide Previously XQB6-3272SC2

Mini Hand Screw Clamp 2 inch Jaws open 1.75 inches and are just over 1/4 inch wide Use the screws to adjust the tension of the clamp Can adjust the angle of the clamp by tightening one side more than the other For building models, miniatures, wood...

Mini Hand Screw Clamp 2 1/2 inch Jaws open 1 7/8 inches Jaws are about 1 inch long by 7/16 inch wide Use the screws to adjust the tension of the clamp Adjust angle of clamp by tightening one side more than the other For building models,...

24pc Black Mini Spring Clamp Set 24 piece set 2 1/2 inches overall in length Jaws open about 1 inch wide Black plastic clamp with plastic jaws Previously SGS1-3271SC

Straight Cross Lock Clamp Tweezers, Fiber Grip 4 5/8 inches long overall Fine plain tips Heat resistant fiber grips Cross lock action provides the clamping force. Frequently used in soldering as a clamp and heat sink Can be used in a lot off...

Curved Cross Lock Clamp Tweezers 4.5 inches overall Medium point Smooth, not serrated tips Cross lock action provides the clamping force Frequently used in soldering as a clamp and heat sink Can be used in a lot off applications where a small...

Clamp Tweezers with Medium Tips 4 3/4 inches long overall Plain tips are about 1 5/8 inches long Tips open about 5/8 inch Cross lock action provides the clamping force Frequently used in soldering as a clamp and heat sink Can be used in a lot off...

Small Part Drying Strip 5 clips Strip is about 12 inches long with clear suction cups on either end Alligator clips hang down from the strip Clip onto small parts for drying, painting, etc Hang using the included suction cups or on other hardware...

Offset Stand-up Cross Lock Clamp Tweezers 6 inches long overall Jaws open about 1/2 inch Blunt serrated tips Sturdy, self locking tweezers Designed to sit on the work surface while holding onto item being worked on Allows hands free...

Right Angle Blunt Tip Cross Lock Clamp Tweezers, Fiber Grips 6 inches long overall Heat resistant Fiber Grips 90 Degree Curved Tips Inside of tips are plain, not serrated Fine Tips open about 7/8 inch Cross lock action provides the clamping...

Curved Cross Lock Clamp Tweezers 6.25 inches long overall Blunt serrated tips Tips open about 3/4 inch Sturdy, self locking tweezers Designed to sit on the work surface while holding onto item being worked on Allows hands free operation Cross...

Curved Clamp Tweezers, Fiber Grips 6 1/4 inches long overall Heat resistant fiber grips Blunt serrated tips Tipc open about 3/4 inch Cross lock action provides the clamping force Frequently used in soldering as a clamp and heat sink Useful in...

Right Angle Blunt Tip Cross Lock Clamp Tweezers, Fiber Grips 6 1/4 inches long overall Heat resistant Fiber Grips 90 Degree Curved Tips Blunt Tips open about 7/8 inch Tweezers have a groove that runs perpendicular to the handle Cross lock...

Straight Cross Lock Clamp Tweezers 6 1/2 inches long overall Tips open about 7/8 inch Blunt serrated tips Sturdy, self locking tweezers Designed to sit on the work surface while holding onto item being worked on Allows hands free operation Cross...

Straight Cross Lock Clamp Tweezers, Fiber Grips 6 1/2 inches long overall Heat resistant fiber grips Blunt tips Cross lock action provides the clamping force Frequently used in soldering as a clamp and heat sink Can be used in a lot off...

Curved Clamp Tweezers with Fiber Grips 6 1/2 inches long overall Heat resistant fiber grips 90 degree curved, blunt serrated tips Serrated portion of tips are about 1/2 inch long Cross lock action provides the clamping force Frequently used in...

Excel Small Plastic Bar Clamps Excel 55663 2 per package For clamping delicate work where proper tension is a must Clamps incorporate side beams marked in inches Notched jaws to help keep projects steady and easy to use quick release lock 3 1/4...

Excel Large Plastic Bar Clamps Excel 55664 2 per package For clamping delicate work where proper tension is a must Clamps incorporate side beams marked in inches Notched jaws to help keep projects steady and easy to use quick release lock 7 1/2 inch...