Burrs - Diamond

Burrs - Diamond

  • Out of stock

    Dremel 7134 - 5/64 inch CONE Diamond Point

    Dremel

    $5.49
    Dremel 7134 - 5/64 inch Cone Diamond Point 5/64 inch cone shaped head 1/8 inch shank For fine detail work, cutting, engraving, carving, touch-up and finishing Great when used on wood, jade, ceramic, glass, hardened steel, semi-precious stones and...
    BDF73-7134
    $5.49
  • Out of stock

    Dremel 7123 - 3/16 X 3/8 inch CYLINDER Diamond Point

    Dremel

    $8.79
    Dremel 7123 - 3/16 X 3/8 inch Cylinder Diamond Point 3/16 inch diameter x 3/8 inch long cylinder 1/8 inch shank Bits are covered with diamond particles For fine detail work, cutting, engraving, carving, touch-up and finishing Use on hard materials...
    BDF61-7123
    $8.79
  • Dremel 7122 3/32 inch Cylinder Diamond Point

    Dremel

    $4.97
    Dremel 7122 - Cylinder Diamond Point 1/8 inch shank Bits are covered with diamond particles For fine detail work, cutting, engraving, carving, touch-up and finishing Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other...
    BEH03-7122
    $4.97
  • Out of stock

    Dremel 7120 - 17/64 inch Knife Wheel Diamond Point

    Dremel

    $8.79
    Dremel 7120 Knife Edge Wheel Diamond Point 1/8 inch shank 17/64" diameter wheel For use in Dremel rotary tools Extend life of point by using a cooling agent such as Eurotool Cut Lube For fine detail work, cutting, engraving, carving, touch-up and...
    BDF37-7120
    $8.79
  • Dremel 7105 - Round Diamond Burr

    Dremel

    $8.79
    Dremel 7105 Round Diamond Point 11/64 inch Ball 3/32 inch Shank For fine detail work, cutting, engraving, carving, touch-up and finishing Use on hard materials, wood, jade, ceramic, glass, hardened steel, semi-precious stones Diamond coated...
    XJA45-7105
    $8.79
  • 5/32 x 7/16 inch Bullet Diamond Burr - 1/8 inch shank

    WS

    $1.29
    5/32 inch Bullet Diamond Coated Burr 5/32 x 7/16 inch (4 x 11.1 mm) bullet shaped head 1/8 inch shank For use with Dremel rotary tools Diamond coated accessories will cut into glass, wood, metal, stone, practically anything For longer life, use...
    D-CB03
    $1.29
  • 4.1mm Round Diamond Bur -320 grit - 3/32 inch shank

    WS

    $2.59
    4.1mm Round 320 grit Diamond Bur - 3/32 inch shank 4.1mm Round Diamond Bur 320 grit 3/32 inch shank Recommended Speed: 20,000-35,000 RPM Resistant to: acid, alkali and heat Manufacturer specializes in products for the manicure and nail...
    D-EC20-DD7068
    $2.59