Burrs - Steel

Burrs - Steel

  • 0.7 x 1.0mm Cone HSS Cutter - Germany - 3/32 inch shank

    North American Rotary

    $1.29
    0.7mm Cone High Speed Steel Cutter 0.7mm diameter by 1.0mm long cone shaped cutter 3/32 inch shank High speed steel For use with Dremel rotary tools Ideal for shaping, hollowing, grooving, slotting, or inlaying Cone shape is good for enlarging,...
    D-EI09
    $1.29
  • Out of stock

    0.9 - 1.4mm Cup Cutter Set - 3/32 inch shank - 6pc

    North American Rotary

    $11.97
    6pc Cup Cutter Set 0.9 - 1.4mm 6 piece set 0.9, 1, 1.1, 1.2, 1.3 and 1.4mm diameter cups 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting feel with...
    D-JU23
    $11.97
  • 1.5 - 2.5mm Cup Cutter Set - 3/32 inch shank - 6pc

    North American Rotary

    $12.97
    6pc Cup Cutter Set 1.5mm - 2.5mm 6 piece set 1.5, 1.7, 1.9, 2.1, 2.3 and 2.5mm diameter cups 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting feel with...
    D-GO17
    $12.97
  • 15mm Concave Edge Wheel Cutter - Swiss - 1/8 inch shank

    North American Rotary

    $7.97
    15mm High Speed Steel Concave Wheel Cutter 15mm diameter 1/8 inch shank Made of high speed steel For use with Dremel rotary tools For shaping, hollowing, grooving, slotting, or inlaying Stone setting burs are used to cut seats for stones in...
    D-DZ13
    $7.97
  • 2.7 x 1.9mm Cup Cutter - Germany - 3/32 inch shank

    North American Rotary

    $2.97
    2.7mm Cup Cutter Tungsten Vanadium Steel 2.7mm diameter x 1.9mm cup 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting feel with each bur over and over...
    D-EH17
    $2.97
  • 2.9 x 1.9mm Cone HSS Cutter - Swiss - 3/32 inch shank

    North American Rotary

    $1.79
    2.9mm Cone High Speed Steel Cutter 2.9mm diameter by 1.9mm long cone shaped cutter 3/32 inch shank Made of high speed steel For use with Dremel rotary tools For shaping, hollowing, grooving, slotting, or inlaying Use on soft metals, plastics and...
    D-EI20
    $1.79
  • 2.9 x 2mm Cup Cutter - Germany - 3/32 inch shank

    North American Rotary

    $2.97
    2.9mm Cup Cutter Tungsten Vanadium Steel 2.9mm diameter cup 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting feel with each bur over and over...
    D-EH18
    $2.97
  • 2.9 x 3.8mm Cone HSS Cutter - Germany - 3/32 inch shank

    North American Rotary

    $1.79
    2.9mm Cone High Speed Steel Cutter 2.9mm diameter by 3.8mm long cone shaped cutter 3/32 inch shank High speed steel For use with Dremel rotary tools Ideal for shaping, hollowing, grooving, slotting, or inlaying Cone shape is good for enlarging,...
    D-EI12
    $1.79
  • 4 x 6.2mm Cylinder HSS Cutter - 3/32 inch shank - Germany

    North American Rotary

    $3.97
    4.0mm Medium Cut Cylinder Cutter High Speed Steel 4.0mm diameter x 6.2mm long cylinder cutter 3/32 inch shank Medium Cut This cutter does cut on the end Made of high speed steel For use with Dremel rotary tools For shaping, hollowing, grooving,...
    D-EG05
    $3.97
  • 4mm Round End HSS Cutter - Swiss - 1/8 inch shank

    North American Rotary

    $1.97
    4mm Round End Cutter High Speed Steel 4mm diameter round end bur 1/8 inch shank High Speed Steel Black oxide coating provides heat and corrosion resistance to increase the life of the bur Cuts only on the end For use with Dremel rotary tools For...
    D-CH32
    $1.97
  • 6 x 3mm Cone HSS Cutter - 3/32 inch shank - Germany

    North American Rotary

    $2.97
    6mm Cone High Speed Steel Cutter 6mm diameter by 3mm long cone shaped cutter 3/32 inch shank High speed steel For use with Dremel rotary tools Ideal for shaping, hollowing, grooving, slotting, or inlaying Cone shape is good for enlarging,...
    D-EE13
    $2.97
  • 6.75 x 4.5mm Cone HSS Cutter - Swiss - 1/8 inch shank

    North American Rotary

    $2.97
    6.75 Cone High Speed Steel Cutter 6.75mm diameter by 4.5mm long cone shaped cutter 1/8 inch shank Made of high speed steel Black oxide coating provides heat and corrosion resistance to increase the life of the bur For use with Dremel rotary...
    D-CH42
    $2.97
  • 6mm Round Edge HSS Wheel - Germany - 3/32 inch shank

    North American Rotary

    $2.97
    6.0mm Round Edge Wheel, Tungsten Vanadium 6.0mm diameter by 3.5mm thick round edge wheel shaped cutter 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting...
    D-EH01
    $2.97
  • 7mm Cone Wheel HSS Cutter - 1/8 inch shank - Swiss

    North American Rotary

    $2.97
    7mm Flat End Cone Wheel High Speed Steel Cutter 7mm diameter by 2.3mm long flat end cone shaped cutter 1/8 inch shank Made of high speed steel Black oxide coating provides heat and corrosion resistance to increase the life of the bur For use with...
    D-CH36
    $2.97
  • 7mm Round Edge HSS Wheel - Germany - 3/32 inch shank

    North American Rotary

    $2.97
    7.0mm Round Edge Wheel, Tungsten Vanadium 7.0mm diameter by 4mm thick round edge wheel shaped cutter 3/32 inch shank Tungsten Vanadium Steel has better strength and hardness than high speed steel Exact fluting guarantees the same quality cutting...
    D-EH02
    $2.97
  • 7mm Round End HSS Cutter - Swiss - 1/8 inch shank

    North American Rotary

    $2.97
    7mm Round End Cutter High Speed Steel 7mm diameter round end bur 1/8 inch shank High Speed Steel Black oxide coating provides heat and corrosion resistance to increase the life of the bur Cuts only on the end For use with Dremel rotary tools For...
    D-CH44
    $2.97