Diamond Burrs - Cone-Inverted

1.6mm Inverted Cone Medium Grit Diamond Coated Burr 1.6 x 1.8mm inverted cone shaped head Medium - approximately 150 Grit / 107-126 microns 3/32 inch shank For use with Dremel rotary tools 20,000 RPM maximum Inverted cones are good for undercuts...

1.6mm Inverted Cone Medium Grit Diamond Coated Burr 1.6 x 4.2mm inverted cone shaped head Medium - approximately 150 Grit / 107-126 microns 3/32 inch shank For use with Dremel rotary tools 20,000 RPM maximum Inverted cones are good for undercuts...

1.6 x 4.0mm Inverted Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 4.0mm long Inverted Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recommended Speed: 20,000-35,000 RPM Resistant to: acid, alkali and heat Manufacturer...

1.6 x 1.4mm Inverted Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 1.4mm long Inverted Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recommended Speed: 20,000-35,000 RPM Resistant to: acid, alkali and heat Manufacturer...

1.4mm Inverted Cone Medium Grit Diamond Coated Burr 1.4 x 1.8mm inverted cone shaped head Medium - approximately 150 Grit / 107-126 microns 3/32 inch shank For use with Dremel rotary tools 20,000 RPM maximum Inverted cones are good for undercuts...

1.2 x 4.0mm Inverted Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.2mm Diameter by 4.0mm long Inverted Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recommended Speed: 20,000-35,000 RPM Resistant to: acid, alkali and heat Manufacturer...