Dremel

5/64 inch Inverted Cone Engraver Compare to Dremel 110 5/64 inch diameter inverted cone 3/32 inch shank 1 3/4 inches long overall Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft...

1 inch Felt Wheel, Compare to Dremel 429 Felt polishing wheel Compare to Dremel 429 1 inch diameter by 3/16 inch thick Use with 3/32 inch screw mandrel; not included Use on most ferrous metals, stones, glass and ceramics May be used with or...

Dremel US510 Ultra-Saw Metal Cut-off Wheel - 60 Grit Dremel US510 Sold four wheels per shrink wrapped package 60 Grit 3 1/2 inches in diameter 0.049 inch thick 11.1mm / 7/16 inch hole size For ferrous and non-ferous metals; angle iron, gutters,...

1/32 inch Round Engraving Cutter Compare to old style Dremel 105 1/32 inch diameter 3/32 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals Use for carving...

1/16 inch Round Ball Engraving Cutter Compare to old style Dremel 106 1/16 inch diameter head 3/32 inch shank diameter Made of Tungsten Vanadium Steel which holds sharpness longer than high speed steel Exact fluting will guarantee the same quality...

3/32 inch Round Engraving Cutter Compare to old style Dremel 107 3/32 inch diameter ball 3/32 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals For use in Dremel rotary...

1/32 inch Cross Cut Needle Engraver Compare to old style Dremel 111 1/32 inch diameter 3/32 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals For use in Dremel rotary...

3/64 inch Needle Engraver Compare to Dremel 112 3/64 inch diameter 3/32 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals For use in Dremel rotary tools For longer...

1/16 inch Cross Cut Needle Engraver Compare to old style Dremel 113 1/16 inch diameter 3/32 inch shank Ideal for detail engraving, carving and routing Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals Use for carving...

Compare to Dremel 425 - Polishing Wheel Similar to Dremel 425 but not in retail packaging 7/8 inch diameter by 1/8 inch thick wheel Flexible rubber polishing wheel infused with abrasive Use with 1/16 inch screw mandrel; not included Ideal for...

Compare to Dremel 425 - Soft Grey Polishing Wheel Similar to Dremel 425 but a little finer grit and softer Not in retail packaging 7/8 inch diameter by 1/8 inch thick wheel Soft rubber polishing wheel infused with abrasive Use with 1/16 inch screw...

Compare to Dremel 428 Carbon Steel Wheel Brush About 3/4 inch wheel diameter, but size may vary 1/8 inch shank diameter Ideal for cleaning and removing rust and corrosion Use on brass, copper or other soft ferrous metals Can also use wire...

Compare to Dremel 431 - 6pc Sanding Drums 6 piece set Identical to Dremel 431 but not in retail packaging 1/4 inch diameter x 1/2 inch long 60 Grit For rough shaping and smoothing Use on wood, fiberglass or rubber Use for removing rust from...

Compare to Dremel 438 Aluminum Oxide Sanding Drums 6 pieces Identical to Dremel 438 but not in retail packaging 120 Grit 1/4 inch diameter x 1/2 inch long For use in Dremel rotary tools For rough shaping and smoothing Use on wood, fiberglass and...

1/4 inch Premium Sanding Drums, 240 Grit 25 piece 1/4 inch diameter x 1/2 inch long Extra fine, 240 Grit Use with 1/4 inch sanding mandrel arbor; not included For use with Dremel rotary tools New but not in retail packaging Compare to Dremel...

1/4 inch Premium Sanding Drums, 240 Grit 6 piece 1/4 inch diameter x 1/2 inch long Extra fine, 240 Grit Use with 1/4 inch sanding mandrel arbor; not included For use with Dremel rotary tools New but not in retail packaging Compare to Dremel...

Compare to Dremel 562 - Carbide Bit for Cutting Tile 1/8 inch shank Most have a protective wax coating and are marked 'Irwin 1/8' Similar to Dremel 562 but not in retail packaging Use to cut wall tile to fit around fixtures Cut cement board or...

Compare to Dremel 85602 Green Wheel Grinding Stone - Open Package 1/8 inch shank 13/32 inch in diameter Compare to Dremel 85602 but not in retail packaging Silicon Carbide stone Color  and shape may vary slightly Ideal for sharpening,...

Compare to Dremel 85602 Wheel Grinding Stone - Open Package 1/8 inch shank 13/32 inch in diameter Compare to Dremel 85602 but not in retail packaging Silicon Carbide stone Color  and shape may vary slightly Ideal for sharpening, deburring...

1/32 inch Inverted Cone Engraving Cutter Similar to old style Dremel 108 1/32 inch diameter inverted cone 3/32 inch shank Made of Tungsten Vanadium Steel which holds sharpness longer than high speed steel Exact fluting will guarantee the same...