null

Dremel

Dremel

  • Dremel 442-02 Carbon Steel CUP Brush - 2pc

    Dremel

    $4.49
    Dremel 442-02 - 2pc Carbon Steel CUP Brush 1/8 inch shank 2 brushes per package Comes in original packaging For use in Dremel rotary tools Well suited for cleaning flat surfaces and getting into hard-to-reach places like slots Ideal for cleaning...
    BCX34-442-02
    $4.49
  • Out of stock

    Dremel 4485 Collet and Nut Set - 5pc

    Dremel

    $6.59
    Dremel 4485 Collet and Nut Set 5 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Collet Nut is for use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier Models 260, 270 ,280, and 380-5 For use...
    BEH11-4485
    $6.59
  • Dremel 4486 Keyless Chuck

    Dremel

    $8.97
    Dremel 4486 MultiPro New Style Keyless Chuck Dremel 4486 Change bits without using a wrench or changing collet sizes Will hold bits with shanks that range from 1/32 inch to 1/8 inch NOT Compatible with the Dremel 4200 or 380-5; is compatible with...
    BEX06-4486
    $8.97
  • Out of stock

    Dremel 453 - Chain Saw Sharpening Stones 5/32 inch -

    Dremel

    $3.97
    Dremel Chain Saw Sharpening Stone, 2 pack Dremel 453 2 piece 5/32 inch diameter stone 1/8 inch shank Precision ground abrasive stone for quick, easy sharpening of chain saw blades Ideal for sharpening chain saw blades, quickly and easily For use...
    XJB79-453
    $3.97
  • Dremel 455 -Chain Saw Sharpening Stone 7/32 inch - 2pc

    Dremel

    $3.97
    Dremel 7/32 Inch Chain Saw Sharpening Stone, 2 pack Dremel 455 2 piece package 7/32 inch diameter 1/8 inch shank Precision ground abrasive stone for quick, easy sharpening of chain saw blades For use with Dremel rotary tools Ideal for sharpening...
    BBB50-455
    $3.97
  • Dremel 456 Cut-off Wheel Washer Set - 2pc

    Dremel

    $1.49
    Dremel 456 Cut-off Wheel Washer Set, 2pc 2 piece set These washers used to come with Dremel 456 Reinforced Cutoff Wheels Use a 1/16 inch screw mandrel in cut-off wheels that have an 1/8 inch center hole Creates a stronger connection the screw...
    BEK42
    $1.49
  • Dremel 461 - 1/4 inch Cylinder Rubber Polishing Point

    Dremel

    $2.49
    Dremel Cylinder Rubber Polishing Point Dremel 461 1/4 inch diameter by 7/16 inch long cylinder 3/32 inch Shank Rubber polishing points are infused with abrasive Use to remove rough areas, small burrs and scratch marks Ideal for cleaning and...
    BEH06-461
    $2.49
  • Dremel 462 - 1/4 inch Bullet Rubber Polishing Point

    Dremel

    $2.49
    Dremel Bullet Cone Rubber Polishing PointDremel 4621/4 inch diameter x 5/8 inch long 3/32 inch shankRubber polishing points are infused with abrasiveUse to remove rough areas, small burrs and scratch marksIdeal for cleaning and defining grooves10,000RPM...
    BEH12-462
    $2.49
  • Out of stock

    Dremel 463 - 1/4 inch Cone Polishing Point - 3/32 inch Shank

    Dremel

    $2.49
    Dremel Tapered Cone Rubber Polishing Point Dremel 463 1/4 x 9/16 inch tapered cone 3/32 inch shank A pointed tip polishing accessory made with blue rubber and abrasives Use for removing rough areas, small burs and scratch marks Use on ferrous...
    BBB25-463
    $2.49
  • Dremel 480 - 1/8 inch Collet

    Dremel

    $2.49
    Dremel 480 - 1/8 inch Collet Dremel 480 1/8 inch Collet Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works with Dremel 225 Flex Shaft Attachment; not included For all Dremel rotary tools except Models...
    BLU47-480
    $2.49
  • Dremel 480 - 1/8 inch Collet - Open Package

    Dremel

    $1.79
    Dremel 480 - 1/8 inch Collet - Open Packaged Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works with Dremel 225 Flex Shaft Attachment; not included For all Dremel rotary tools except Models 1, 2, Series 1 or...
    D-CD04-480-OP
    $1.79
  • Dremel 481 - 3/32 inch Collet

    Dremel

    $2.49
    Dremel 481 - 3/32 inch Collet Holds bits with 3/32 inch shank 3 identification rings on shank for 3/32 inch collet Works with Dremel 225 Flex Shaft Attachement; not included For all Dremel rotary tools except Models 1, 2, Series 1 or...
    BEW19-481
    $2.49
  • Dremel 482 - 1/16 inch Collet

    Dremel

    $2.49
    Dremel 482 - 1/16 inch Collet Holds bits with an 1/16 inch Shank Features two small identification rings around its shank Collets are compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and...
    BEW43-482
    $2.49
  • Dremel 483 - 1/32 inch Collet

    Dremel

    $2.49
    Dremel 483 - 1/32 inch Collet Holds bits with 1/32 inch Shanks Features one small identification ring around its shank Collets are compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series...
    XJB53-483
    $2.49