Watch Band

Watch Band

  • Out of stock

    SE

    100pc Watch Band Link Remover Pin Set

    $10.97
    100pc Watch Band Link Remover Pin Set 100 piece set For use with SE JT6305A, JT63055 and JT3055 Watch Band Link Removers, sold separately Fits our link removal tools SKU: SAC4-6305 and XQB2-63055 May fit other brands Set includes: 10 - 0.7 mm...
    BLW05
  • SE

    360pc Watch Band Spring Bar Pins 8mm-25mm

    $5.97
    Watch Band Spring Bar Assortment 360 piece set Stainless steel pins 18 sizes range from 8mm to 25mm Spring bar shaft diameters are 1.5mm 20 pins per size Previously WC02
    BCP54-JT6322WP
  • SE

    4pc Watch Band Link Removal Tool Extra Bars 23mm and 31mm

    $1.97
    Watch Link Removal Tool Replacement Pins 4 piece set For BBA73 Metal Body Watch Band Link Removal Tool; not included Two 23mm replacement pins Two 31mm replacement pins Pins are about 0.038 inch in diameter Some may have a burr that needs cleaned...
    BDL55
  • SE

    Watch Band / Bracelet Holder - Plastic

    $1.49
    Plastic Watch Band / Bracelet Holder Holder has different slots for different sized bands/bracelets Allows you to more easily remove and insert pins and screws Holder has holes in the bottom so it can be mounted to your bench or work...
    SGQ5-JT6418
  • SE

    Watch Band Link Removal Tool - Metal

    $5.97
    Metal Watch Band Link Removal Tool Red Metal Body Works for watch Bands between 0 and 15mm wide If you trim the pin, you could use them for watches up to about 21mm in width Pin is about 0.038 inch in diameter The pins are delicate must be used...
    BBA73
  • SE

    Watch Band Link Remover - 5 extra pins

    $2.97
    Watch Band Link Removal Tool, 5 Extra Pins Plastic body watch band link removal tool 5 replacement pins included End of pin is about 0.034 inches in diameter Can accept watch bands up to 7/8 inch wide The pins are delicate must be used with...
    SAC4-JT6305A
  • SE

    Watch Band Link Remover - Adjustable Height - 5 extra pins

    $3.97
    Adjustable Height Watch Band Link Remover with 5 replacement pins End of pin is about 0.034 inches in diameter Accept watch bands up to 7/8 inch wide The pins are delicate must be used with care For best results, make sure the pin is aligned with...
    BCP60-JT63055
  • SE

    Watch Band Spring Bar Tool

    $2.97
    Watch Band Spring Bar Tool This is for 1 tool; photo shows each side of the tool The handle has a ruler in inches on one side and metric on the other side Pointed tip and Forked Tip For moving spring to remove or add watch band The tips...
    BCZ03-JT620
  • SE

    Watch Band Spring Bar Tool - Extra Pins

    $3.97
    Watch Band Spring Bar Tool Extra Pins - Two of each stylePins are reversible to make this unit work better with more styles of watchesUsed for removing and inserting spring bars to connect the watch band to the watch case
    SHC7-JT6203
  • HAWK

    Watch Tool Kit - 4 in 1

    $3.97
    4 in 1 Watch Repair Tool Metal handle with chuck 2mm flat screwdriver tip 3mm flat screwdriver tip 3mm phillips screwdriver tip 1.05mm pin tips Store tips inside metal handle Handle is about 3 1/2 inches long without tips End of handle swivels
    BEH58