Dremel Brand

Dremel Flex Shaft Driver Cap Square hole to mate up with the square drive of a Dremel attachment Use with the 225 Flex Shaft, 670 Mini Saw or 575 R...

Dremel Carbon Armature Motor Brush and Spring Set, 2pc Dremel 5646 2 piece set For Dremel model 4000; not included Replace motor brushes for longe...

Dremel 90930 Carbon Armature Motor Brushes Dremel 90930 2 piece package Improve performance and extend the life of your tool Replace motor brushes...

Dremel 90962 Collet Nut Wrench Used to remove nut to change collets For use with Dremel Rotary Tools Not in retail packaging

Dremel Carbon Armature Motor Brush and Spring Set, 2pc Dremel 24715, 2610024715, 2610053746 2 piece set For Dremel model 4200 and 4300; not includ...

Dremel Brad Point Drill Bit Set Dremel 631 4 piece set Includes: 1/8 inch, 5/32 inch, 3/16 inch, and 1/4 inch drill bits 1/8 inch shank Titanium c...

Dremel 400 XPR Carbon Armature Motor Brush and Spring Set, 2pc Dremel 90937, 2610921562 2 piece set For Dremel model 400 XPR; not included Replace...

Dremel Precision Drill Bit Set Dremel 628 7 piece set Includes: 1/32 inch / 0.8 mm drill bit (use #483 collet) 3/64 inch / 1.2 mm drill bit (use...

Dremel 4486 MultiPro New Style Keyless Chuck Dremel 4486 Change bits without using a wrench or changing collet sizes Will hold bits with shanks tha...

Dremel 395 Motor Coupling Bosch/Dremel number: 2615294309 Refer to owners manual for part number verification and installation information Compatib...

2pc Dremel ROUND Engraving Cutters, 1/32 inch Dremel 105 2 per package 1/32 inch diameter 1/8 inch shank Ideal for detail engraving, carving and r...

Dremel EZ Lock 1 1/2 inch Metal Cutting Cut-off Wheels, 12pc Dremel EZ456B 12 piece package 1 1/2 inch diameter cut-off wheels Use with EZ402 EZ l...

Dremel Carbon Armature Motor Brush and Spring Set, 2pc Dremel 2610009829 2 piece set For Dremel model 3000; not included Replace motor brushes for...

Dremel 409 - Emery Cut-off Wheels, 36pc 36 piece 15/16 inch / 23.8mm diameter cut-off wheels 0.023 inch thick For cutting metal with limited use on...

5pc Dremel EZ Lock Sanding Discs, 60 Grit Dremel EZ411SA 5 per package 1 1/4 inch diameter sanding discs 60 grit Allows for flat sanding and edge s...

Dremel 1/2 inch EZ Sanding Drum Mandrel Dremel EZ407SA One-piece mandrel design Change sanding bands as easy as PULL - PLACE - SECURE Allows for fl...

Dremel 4485 Collet and Nut Set 5 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Collet Nut is for use with all Dremel...

2pc Dremel Round Engraving Cutter, 1/16 inch Dremel 106 2 per package 1/16 inch diameter ball 1/8 inch shank For use in Dremel rotary tools Ideal f...

Dremel 678-02 Circle Cutter and Straight Edge Guide Makes circles from 3/4-12 inches (1.9-30 cm) in diameter Precision stamped steel construction ...

Dremel EZ Lock Mandrel Dremel EZ402 1/8 inch shank One piece mandrel design eliminates the need for screw Faster accessory changes Easy as 1-2-3, j...

Dremel 490 Dust Blower Fan Attachment Dremel 490 Replaces standard collet nut and stays on the tool 490 Dremel Dust Blower improves visibility by r...

Dremel 9904 - Round End Cylinder Tungsten Carbide Cutter - Open Package 1/8 inch shank 3/32 inch diameter Dremel 9904 but not in retail packaging A...

Dremel Replacement Collet Nut Note: These may vary, having 2 or 4 flats Replacement collet nut for Dremel Rotary Tools used to tighten bits and col...

Dremel 408 Sanding Drums 6 pieces 1/2 inch diameter by 1/2 inch long sanding bands 60 grit Use with a Dremel 407 sanding drum mandrel arbor; not in...

5pc Dremel EZ Lock Sanding Discs, 240 Grit Dremel EZ413SA 5 per package 1 1/4 inch diameter sanding discs 240 grit Allows for flat sanding and edge...

2pc Dremel ROUND Engraving Cutter, 3/32 inch Dremel 107 2 per package 3/32 inch diameter ball 1/8 inch shank Ideal for detail engraving, carving an...

5pc Dremel EZ Lock Sanding Discs, 120 Grit Dremel EZ412SA 5 per package 1 1/4 inch diameter sanding discs 120 grit Allows for flat sanding and edg...

Dremel 402 - 1/16 inch Screw Mandrel Arbor 1/8 inch Shank Used with cut-off wheels and discs that have a 1/16 inch center hole Use with Dremel #40...

Dremel 90827 - 2pc Carbon Armature Motor Brushes 2 piece For use with Dremel Models 270, 280, 370, 370-5, and 380 Replace motor brushes for longer...

Dremel NEEDLE Engraving Cutter, 1/16 inch Dremel 113 1/16 inch diameter 1/8 inch shank For use in Dremel rotary tools Maximum 35,000 RPM Ideal for...

Dremel Needle Engraving Cutter, 1/32 inch Dremel 111 One per package 1/32 inch diameter tip 1/8 inch shank Ideal for detail engraving, carving and...

Dremel Inverted Cone Engraving Cutter, 1/32 inch Dremel 108 1/32 inch diameter inverted cone cutter 1/8 inch shank A versatile, high quality cutte...

Dremel EZ Lock 1 1/2 inch Thin Cut Cut-off Wheels, 5 pack Dremel EZ409 5 piece package 1.5 inch diameter wheel 0.02 inch thick Metal cut-off wheels...

Dremel EZ Lock Grinding Wheel, 2pc Dremel EZ541GR 2 per package The only Dremel accessory designed to flush-grind a surface Unique domed shape and ...

Dremel 7/32 Inch Chain Saw Sharpening Stone, 2 pack Dremel 455 2 piece package 7/32 inch diameter 1/8 inch shank Precision ground abrasive stone fo...

Dremel 120 grit Flap Wheel Dremel 503 1 1/8 diameter x 3/8 inch thick flap wheel 1/8 inch shank Use flap wheels on metals, wood, rubber, or plasti...