Collets & Chucks

1/32 inch Brass Collet Holds bits with a 1/32 inch shank Generic replacement for Dremel 483 collet Compatible with Dremel 225 Flex-Shaft attachmen...

1/16 inch Brass Collet Holds bits with a 1/16 inch shank Generic replacement for Dremel 482 collet Compatible with Dremel 225 Flex-Shaft attachmen...

3/32 inch Brass Collet Holds bits with a 3/32 inch shank Generic replacement for Dremel 481 collet Compatible with Dremel 225 Flex-Shaft attachment...

1/8 inch Aluminum Collet For use with rotary bits that have a 1/8 inch shank Generic replacement for Dremel 480 collet Compatible with Dremel 225 F...

1/8 inch Brass Collet. Replacement for Dremel 480. Used to hold Bits with a 1/8 inch Shank. For use with Dremel rotary bits that have a 1/8 inch s...

3/32 inch Aluminum Collet For use with rotary bits that have a 3/32 inch shank Generic replacement for Dremel 481 collet Compatible with Dremel 22...

1/32 inch Brass Collet Closeout items are non-returnable. These are on closeout because the machining isn't as nice as it should be Holds bits with...

4 piece Brass Collet Set 4 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Replacement for Dremel 480, 481, 482, and 4...

Dremel 4485 Collet and Nut Set 5 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Collet Nut is for use with all Dremel...

Dremel 4486 MultiPro New Style Keyless Chuck Dremel 4486 Change bits without using a wrench or changing collet sizes Will hold bits with shanks tha...

Dremel 480 - 1/8 inch Collet Dremel 480 1/8 inch Collet Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works...

Dremel 480 - 1/8 inch Collet - Open Packaged Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works with Dreme...

Dremel 481 - 3/32 inch Collet Holds bits with 3/32 inch shank 3 identification rings on shank for 3/32 inch collet Works with Dremel 225 Flex Shaf...

Dremel 482 - 1/16 inch Collet Holds bits with an 1/16 inch Shank Features two small identification rings around its shank Collets are compatible w...

Dremel 483 - 1/32 inch Collet Holds bits with 1/32 inch Shanks Features one small identification ring around its shank Collets are compatible with ...

Dremel 483 - 1/32 inch Collet - Open Package Used to hold Bits with an 1/32 inch shank Dremel 483 but not in retail packaging The 1/32 inch collet...

Dremel 490 Dust Blower Fan Attachment Dremel 490 Replaces standard collet nut and stays on the tool 490 Dremel Dust Blower improves visibility by r...

Dremel 90962 Collet Nut Wrench Used to remove nut to change collets For use with Dremel Rotary Tools Not in retail packaging

EZ Twist Nose Cap Wrench Dremel EZ495 The EZ Twist Nose Cap attachment makes accessory changes quick and easy Features an integrated wrench that a...

Dremel Replacement Collet Nut Note: These may vary, having 2 or 4 flats Replacement collet nut for Dremel Rotary Tools used to tighten bits and col...

Precision Hand Drill Fiskars 132420 6.75 inches x 5.5 inches Softgrip handle is 3 inches long Manually operated by turning the crank Includes four ...

Hex Drive Keyless Chuck Use Dremel rotary bits in a hex drive screwdriver, manual or electric It will hold bits with shanks up to 1/8 inch in diame...

Micro chuck 1/4 inch shank 2 3/8 inches overall in length Chuck head is 1/2 inch diameter 3 collets: 1mm, 2mm, & 3mm Allows you to use smalle...

Extra Long Double End Pin Vise Pin Vise is about 9 inches long overall Two double headed steel collets for 4 collet sizes Holds 0 to 1/8 inch Use ...