Diamond Burrs - Cylinder

EUROTOOL BUR-180.00 Cut Lube Extends the life of burs, cutters, drills, gravers, saw blades, etc. Helps keep tools sharp Reduces friction, chatter,...

Dremel 7123 - 3/16 X 3/8 inch Cylinder Diamond Point 3/16 inch diameter x 3/8 inch long cylinder 1/8 inch shank Required to use with Dremel Rotary...

Dremel 7122 - Cylinder Diamond Point - Open Package Old Style Dremel 7122 but not in retail packaging 3/32 inch shank Required to use with Dremel ...

Dremel 7122 - Cylinder Diamond Point 1/8 inch shank Required to use with Dremel Rotary Tools: Dremel 480 - 1/8 inch collet, or equivalent (sold s...

06.5 x 13mm Cylinder Diamond burr - 150 Grit - 3/32 inch shank 6.5mm Diameter by 13mm long Cylinder Shaped Diamond Burr 150 Grit 3/32 inch shank R...

Eurotool Flame Shaped Hard Felt Bob Eurotool BUF-512.03 1/4 inch diameter by 3/4 inches long 3/32 inch shank Required to use with Dremel Rotary To...

06.5 x 13mm Cylinder Diamond burr - 150 Grit - 3/32 inch shank 6.5mm Diameter by 13mm long Cylinder Shaped Diamond Burr 150 Grit 3/32 inch shank R...

5mm 150 Grit Cylinder Diamond Coated Burr 5mm in diameter by 10mm long 1 3/4 inches in overall length 1/8 inch shank Required to use with Dremel Ro...

5.6mm 40 Grit Cylinder Diamond Coated Burr 5.6mm x 10mm cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Required to use with Dr...

7/32 inch Diamond Coated Chain Saw Sharpening Bit 7/32 inch diameter 120 grit 1/8 inch shank Required to use with Dremel Rotary Tools: Dremel 480...

5.4mm 40 Grit Rounded Cylinder Diamond Coated Burr 5.4mm x 10mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Requi...

5.3mm 80 Grit Rounded Cylinder Diamond Coated Burr 5.3mm x 10mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Requi...

5.3mm 80 Grit Cylinder Diamond Coated Burr 5.3mm x 10mm cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Required to use with Dr...

5mm - 13/64 inch 240 Grit Cylinder Diamond Burr - 1/8 inch shank 5 x 9.6mm - 13/64 x 3/8 inch cylinder shaped head 1 3/4 inches in overall length 1...

05.1 x 9.1mm Cylinder Diamond burr - 150 Grit - 3/32 inch shank 5.1mm Diameter by 9.1mm long Cylinder Shaped Diamond Burr 150 Grit 3/32 inch shank...

4mm 80 Grit Rounded Cylinder Diamond Coated Burr 4mm x 11mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Required ...

4mm 150 Grit Rounded Cylinder Diamond Coated Burr 4mm x 9mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Required ...

4mm 150 Grit Cylinder Diamond Coated Burr 4mm in diameter by 10mm long 1 3/4 inches in overall length 1/8 inch shank Required to use with Dremel Ro...

4.9mm 150 Grit Rounded Cylinder Diamond Coated Burr 4.9mm x 10mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Requ...

4.9mm - 3/16 inch 600 Grit Cylinder Diamond Burr - 1/8 inch shank 4.9 x 9.5mm - 3/16 x 3/8 inch cylinder shaped head 1 3/4 inches in overall length...

3/16 x 3/8 inch 150 Grit Cylinder Diamond Coated Burr Head measures 3/16 inch in diameter by 3/8 inches wide 150 grit diamond abrasive grit 1 3/4 i...

3/16 inch Diamond Coated Chain Saw Sharpening Bit 3/16 inch diameter x 1 inch long diamond cylinder 120 grit 1/8 inch diameter by 3/4 inch long sh...

4.8mm - 3/16 inch 600 Grit Rounded Cylinder Diamond Burr - 1/8 inch shank 4.8 x 9.5mm - 3/16 x 3/8 inch round end cylinder shaped head 1 3/4 inche...

4.8mm - 3/16 inch 400 Grit Rounded Cylinder Diamond Burr - 1/8 inch shank 4.8 x 9.5mm - 3/16 x 3/8 inch round end cylinder shaped head 1 3/4 inche...