Eurotool
EUROTOOL BUR-180.00 Cut Lube
- SKU:
- BET04
- UPC:
- 654207127383
- MPN:
- BUR-180.00
- Availability:
- Ships Same or Next Business Day
MSRP:
Now:
$4.97
Was:
— You save
Description
EUROTOOL BUR-180.00 Cut Lube
- Extends the life of burs, cutters, drills, gravers, saw blades, etc.
- Helps keep tools sharp
- Reduces friction, chatter, and damaging heat build up
- Protects from corrosion
- Convenient push-up tube
- Clean and easy to use
- Touch spinning bur to the surface occasionally during use
- Speeds up production
- Very similar to 'Bur Saver'
Related Products

EUROTOOL Crystal Bright
Eurotool
MSRP:
Now:
$4.97
Was:
EUROTOOL Crystal Bright
EUROTOOL POL-603.00
3 ounce bar
Plastic watch crystal polishing compound
The perfect compound for removing scratches from plastic crystals
This is a money saver and...
BCP08

12.7mm - 1/2 inch x 1 1/2 Cartridge Sanding Roll COARSE 60 Grit - 25pc
Eurotool
MSRP:
Now:
$15.97
Was:
1/2 inch Sanding Cartridge Rolls
EUROTOOL ABR-515.031
25 piece
1/2 inch in diameter by 1 1/2 inches long
Coarse 60 Grit
Cartridge sanding rolls are rolled up sandpaper with a hole in the...
BCY56

Beaders Crimping Pliers - 2-3mm
Eurotool
MSRP:
Now:
$9.97
Was:
Beaders Crimping Pliers
Eurotool PLR-585
5 inches overall
Forms a smooth, secure crimp
Use with French crimp beads or crimp tubes from 2 to 3mm in diameter
Finished crimp is less than 2mm in...
BBH44

No 54 HSS Twist Drill Bits - Made in UK - 10pc
Eurotool
MSRP:
Now:
$7.97
Was:
Number 54 Twist Drill Bits - Made in UK
10 drills per package
#54 wire gauge drill bits
0.0550 inch / 1.397 mm diameter
Tested and proven to be as good if not better than more well-known...
D-DU54

No 74 HSS Twist Drill Bits - Made in UK - 10pc
Eurotool
MSRP:
Now:
$7.97
Was:
Number 74 Twist Drill Bits - Made in UK
10 drills per package
#74 wire gauge drill bits
0.0225 inch / 0.572 mm diameter
Tested and proven to be as good if not better than more well-known...
D-EK74
Customers Also Viewed

Dremel 7150 Bullet and Round Diamond Points - 1/8 inch shank
Dremel
MSRP:
Now:
$7.29
Was:
Dremel 7150 - Bullet and Round Diamond Points
2 piece package
Dremel 7144 - 3/32 inch BULLET Diamond Point
Dremel 7103 - 5/64 inch ROUND Diamond Point
1/8 inch shank
Bits are covered with...
XJB15-7150

Rotary Tool Accessory Set - Revolving Stand - 276pc
SE
MSRP:
Now:
$27.97
Was:
228 Piece Rotary Tool Accessory Set
Assorted bits in a revolving stand
52 Pc Sand Bands
8Pc Felt Wheels
1Pc Felt Bullet
2Pc Rubber Polishing Wheels
3Pc Sand Drums
3Pc Cylindrical Diamond...
SGN3-RA9276

Medium Grit Diamond Burr Set - 1/8 inch shank - 20pc
SE
MSRP:
Now:
$5.97
Was:
Special Buy - Regularly $4.97 - 120 to 150 Grit Diamond Burr Set
20 piece set
Assorted shaped diamond points including ball, cylinder and cone
Assortment may vary from picture
Medium 120-150...
SGR5-82378DB

Medium Grit Diamond Burrs - 1/8 inch shank - 30pc
SE
MSRP:
Now:
$6.97
Was:
Special Buy - 30pc Medium 120-150 Grit Diamond Burrs
1/8 inch shank
120 -150 medium grit
Assorted shapes diamond points including round, cylinder, cone
Assortment may vary from picture
For use...
SHG7-82327DB

Dremel 9905 - 1/8 inch ROUND Tungsten Carbide Cutter
Dremel
MSRP:
Now:
$7.97
Was:
ROUND Tungsten Carbide Cutter
Dremel 9905
1/8 inch round cutting head
1/8 inch shank
Comes in retail packaging
Ideal for shaping, grinding and smoothing hard materials such as: hardened steel,...
BCU51-9905

Dremel 664DR 1.6 and 2mm Diamond Flip Drill Bit
Dremel
MSRP:
Now:
$11.97
Was:
Dremel Diamond Flip Drill Bit 1.6 and 2mm
Dremel 664DR
1/8 inch shank
Diamond coated drill bit
1.6mm drill bit on one end and 2mm drill bit on the other end
Allows you to drill holes...
XJB25-664DR
On Sale

Dremel 9904 Round Cylinder Carbide Cutter - Open Package
Dremel
MSRP:
Now:
$3.99
Was:
$7.97
Dremel 9904 - Round End Cylinder Tungsten Carbide Cutter - Open Package
1/8 inch shank
3/32 inch diameter
Dremel 9904 but not in retail packaging
A high-speed cutter made of tungsten carbide,...
BLW17

Dremel 7123 - 3/16 X 3/8 inch CYLINDER Diamond Point
Dremel
MSRP:
Now:
$8.79
Was:
Dremel 7123 - 3/16 X 3/8 inch Cylinder Diamond Point
3/16 inch diameter x 3/8 inch long cylinder
1/8 inch shank
Bits are covered with diamond particles
For fine detail work, cutting, engraving,...
BDF61-7123

06.4mm - 1/4 inch Cylinder Single Cut Carbide Burr - 1/8 inch shank
SE
MSRP:
Now:
$3.97
Was:
Single Cut Flat End Cylinder Carbide Burr
1/8 inch shank
1/4 x 1/2 inch burr
For use on hard materials like cast iron, steel, and other ferrous materials
For longer life, use with a cooling...
BCP48-CB1981AS

Dremel 9931 TAPER Structured Tooth Tungsten Carbide Cutter
Dremel
MSRP:
Now:
$10.97
Was:
Dremel 9931 Taper Structured Tooth Tungsten Carbide Cutter
3/16 inch diameter x 1 inch long cutting head
1/8 inch shank
A high-speed cutter with teeth made of tungsten carbide
Tungsten carbide...
BLW09-9931