Products

2.6mm 90 Degree Hart Cutter Tungsten Vanadium Steel 2.6mm diameter, 90 degree, hart bearing cutter 1 3/4 inches in overall length 3/32 inch shank ...

2.6mm Round Cutter Tungsten Vanadium Steel 2.6mm diameter round ball bur 1 3/4 inches in overall length 3/32 inch shank Tungsten Vanadium Steel ha...

2.7mm 40 Grit Flame Diamond Coated Burrs Sold in quantities of 2 2.7mm x 10mm Flame shaped head 1 3/4 inches in overall length 1/8 inch shank Diam...

2.7mm 90 Degree Hart Cutter Tungsten Vanadium Steel 2.7mm, 90 degree, hart bearing cutter 1 3/4 inches in overall length 3/32 inch shank For use w...

2.7mm Bud Cutter 2.7mm diameter by 3.8mm long bud shaped cutter 1 3/4 inches long overall 3/32 inch shank For use with Dremel and other rotary too...

2.7mm Cone Cutter Tungsten Vanadium Steel 2.7mm diameter by 3.5mm long cone cutter 1 3/4 inches in overall length 3/32 inch shank For use with Dre...

2.8 x 1.7mm Inverted Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 2.8mm Diameter by 1.7mm long Inverted Cone Shaped Diamond Bur 150 Grit 3/32 ...

2.8 x 7.0mm Cone 100 Grit Grit Diamond Bur - 3/32 inch shank 2.8mm Diameter by 7.0mm long Cone Shaped Diamond Bur 100 Grit 3/32 inch shank Recomme...

Flame Diamond Bur - 3/32 inch shank 2.8mm Diameter by 7.5mm long  320 Grit 3/32 inch shank Recommended Speed: 20,000-35,000 RPM Resistant to: acid...

2.85mm - 7/64 inch Small Head Screw Mandrel Arbor Use with wheels which have 2.85mm - 7/64 inch center hole Head is about 3/16 inch diameter Mandr...

400 Grit Round Diamond Burrs Sold in quantities of 2 2.8mm - 7/64 inch Round Ball 1 3/4 inches in overall length 1/8 inch shank Diamond coated acc...

2.8mm - 7/64 inch 600 Grit Cylinder Diamond Burrs - 1/8 inch shank Sold in quantities of 2 2.8 x 6.4mm - 7/64 x 1/4 inch cylinder shaped head 1 3/...

7/64 inch Threaded Mandrel Arbor with Nut Use with rubber or felt bits Nut is be used to tighten the bit onto the threads 7/64 inch diameter threa...

7/64 Tapered Screw Mandrel Arbor 7/64 diameter threaded tip that tapers to a point Threads are 1/4 inch long 3/32 inch shank For use with Dremel a...

7/64 inch 240 Grit Flame Diamond Coated Burrs Sold in quantities of 2 7/64 x 3/8 inch (2.8 x 10 mm) flame shaped head 1/8 inch shank Diamond coate...

7/64 inch 400 Grit Flame Diamond Coated Burrs Sold in quantities of 2 7/64 x 3/8 inch (2.8 x 10mm) flame shaped head 1/8 inch shank Diamond coated...

7/64 inch 80 Grit Flame Diamond Coated Burrs Sold in quantities of 2 7/64 x 7/16 inch (2.9 x 11 mm) flame shaped head 1/8 inch shank Diamond coate...

7/64 x 7/16 inch Tapered Screw Mandrel Arbor 7/64 diameter threaded tip that tapers to a point Threads are 7/16 inch long 3/32 inch shank For use ...

2.8mm 80 Grit Cylinder Diamond Coated Burrs Sold in quantities of 2 2.8mm x 7mm cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank...

2.8mm 80 Grit Rounded Cylinder Diamond Coated Burrs Sold in quantities of 2 2.8mm x 8mm round end cylinder shaped head 1 3/4 inches in overall len...

2.8mm Round Cutter Tungsten Vanadium Steel 2.8mm diameter round ball bur 1 3/4 inches in overall length 3/32 inch shank Tungsten Vanadium Steel ha...

2.9mm Cone High Speed Steel Cutter 2.9mm diameter by 1.9mm long cone shaped cutter 3/32 inch shank For use with Dremel and other rotary tools Made...

2.9 x 10.3mm Rounded Cylinder burr - 320 Grit - 3/32 inch shank 2.9mm Diameter by 10.3mm long Round End Cylinder Shaped Diamond Burr 320 Grit 3/32...

2.9mm Cone High Speed Steel Cutter 2.9mm diameter by 3.8mm long cone shaped cutter 3/32 inch shank High speed steel Ideal for shaping, hollowing, ...