Products

1.5mm 90 Degree Hart Cutter Tungsten Vanadium Steel 1.5mm diameter, 90 degree, hart bearing cutter 1 3/4 inches in overall length 3/32 inch shank ...

1.5mm Knife Edge Wheel Tungsten Vanadium Steel Cutter 1.5mm diameter knife edge wheel cutter 1 3/4 inches in overall length 3/32 inch shank For us...

1.5mm Round Tungsten Vanadium Steel Cutter 1.5mm round cutter 1 3/4 inches in overall length 3/32 inch shank For use with Dremel and other rotary ...

1.6 mm Flame Diamond Coated Burr 1.6mm flame cone diamond point Medium - approximately 150 Grit / 107-126 microns 3/32 inch shank For use with Dre...

1.6 x 10.0mm Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 10.0mm long Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recom...

1.6 x 10.0mm Cone 320 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 10.0mm long Cone Shaped Diamond Bur 320 Grit 3/32 inch shank Recom...

1.6 x 10mm Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 10mm long Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recommend...

1.6 x 12.0mm Cylinder 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 12.0mm long Cylinder Shaped Diamond Bur 150 Grit 3/32 inch sha...

1.6 x 13mm 150 Grit Cone Diamond Coated Burrs Sold in quantities of 2 1.6 x 13mm cone shaped head 1 3/4 inches in overall length 1/8 inch shank Di...

1.6mm Medium Grit Flat End Cone Diamond Coated Burr 1.6 x 4 mm flat end cone shaped head Medium - approximately 150 Grit / 107-126 microns 3/32 in...

1.6 x 4.0mm Inverted Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 4.0mm long Inverted Cone Shaped Diamond Bur 150 Grit 3/32 ...

1.6mm Round End Cone Medium Grit Diamond Coated Burr 1.6 x 4mm round end cone shaped head Medium - approximately 150 Grit / 107-126 microns 3/32 i...

1.6 x 6.0mm Cylinder 150 Grit Grit Diamond Bur - 3/32 inch shank 1.6mm Diameter by 6.0mm long Cylinder Shaped Diamond Bur 150 Grit 3/32 inch shank...

01.6 x 9.8mm Striped Flame Diamond burr - 150 Grit - 3/32 inch shank 1.6mm Diameter by 9.8mm long Flame Shaped Diamond Bur 150 Grit 3/32 inch shan...

1.6mm - 1/16 inch 240 Grit Cone Diamond Burrs - 1/8 inch shank Sold in quantities of 2 1.6 x 9.4mm - 1/16 x 3/8 inch cone shaped head 1 3/4 inches...

1.6mm - 1/16 inch 240 Grit Cylinder Diamond Burrs - 1/8 inch shank Sold in quantities of 2 1.6 x 7.9mm - 1/16 x 5/16 inch cylinder shaped head 1 3...

1.6mm - 1/16 inch 600 Grit Cylinder Diamond Burrs - 1/8 inch shank Sold in quantities of 2 1.6 x 6.4mm - 1/16 x 1/4 inch cylinder shaped head 1 3/...

1/16 inch Brass Collet Holds bits with a 1/16 inch shank Generic replacement for Dremel 482 collet Compatible with Dremel 225 Flex-Shaft attachmen...

1/16 inch Large Head Screw Mandrel Arbor Head is about 5/16 inch diameter Mandrel is about 1 7/8 inches long overall 3/32 inch shank For use with ...

1/16 inch Large Head Screw Mandrel Arbor Head is about 5/16 inch diameter Mandrel is about 1 7/8 inches long overall 3/32 inch shank For use with...

1/16 inch Thin Head Screw Mandrel Arbor Thin head Head is about 5/16 inch diameter Mandrel is about 1 7/8 inches long overall 3/32 inch shank For ...

1/16 inch Thin Head Screw Mandrel Arbor Thin head Constructed of Stainless Steel Head is about 5/16 inch diameter Mandrel is about 1 7/8 inches lo...

1/16 inch Reinforced Screw Mandrel Arbor Head is about 3/16 inch diameter Mandrel is about 1 3/4 inches long overall 3/32 inch shank For use with...

1/16 inch Small Head Screw Mandrel Use with wheels which have 1/16 inch center hole Head is about 3/16 inch diameter Arbor is about 1 1/2 inches l...