Polishing

12.7mm - 1/2 inch Silicon Softies 80 Grit White Wheel Polisher 1/2 diameter x 3/32 inch thick wheel 3/32 inch shank For use with Dremel and other ...

12.7mm - 1/2 inch Silicon Softies 1000 Grit Pink Wheel Polisher 1/2 diameter x 1/16 inch thick wheel 3/32 inch shank Elastic silicon bonded polish...

Round Abrasive Buffing Point 12.7mm x 12.7mm - 1/2 x 1/2 inch round shaped point 2 inches long overall 1/8 inch shank 45,370 Maximum RPM Medium Al...

1/2 x 3/4 inch Medium Flame Abrasive Buffing Point - 1/8 inch shank 12.7mm x 19mm - 1/2 x 3/4 inch flame shaped point 2 1/4 inches long overall 1/...

1/2 x 1/2 inch Fine Round End Cylinder Abrasive Buffing Point - 1/8 inch shank 12.7mm x 12.7mm - 1/2 x 1/2 inch round end cylinder shaped point 2 ...

Yellow 80 Grit Flame Rubberized Polishing Point 7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank Removes scra...

Green 240 Grit Rubberized Polishing Flame  7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank Removes scratches...

80 Grit Rubber Polishing Wheel 7/16 inch in diameter by 1/8 inch thick wheel 1 1/2 inch in overall length 1/8 inch shank Yellow 80 Grit Removes sc...

600 Grit Rubber Polishing Wheel These are seconds because the sides were not cut square. 7/16 inch in diameter by 1/8 inch thick wheel 1 1/2 inch ...

Yellow 80 Grit Rubber Polishing Cylinder 7/16 inch in diameter by 3/4 inch long cylinder 2 inches in overall length 1/8 inch shank Removes scratch...

240 Grit Rubber Polishing Wheel 7/16 inch in diameter by 1/8 inch thick wheel 1 1/2 inch in overall length 1/8 inch shank Green 240 Grit Removes s...

Green Grit Rubber Polishing Cylinder 7/16 inch in diameter by 3/4 inch long cylinder 2 inches in overall length 1/8 inch shank Removes scratches a...

3/8 Hard Felt Inverted Cone 3/8 diameter x 9/16 inch long inverted cone 3/32 inch shank For use with Dremel and other rotary tools Hard felt is go...

Eurotool CYLINDER Hard Felt Bob Eurotool BUF-512.05 3/8 inch diameter by 5/8 inches long cylinder 3/32 inch shank For use with Dremel and other ro...

Eurotool BUD Hard Felt Bob Eurotool BUF-512.01 3/8 inch diameter by 3/4 inch long bud shape 3/32 inch shank For use with Dremel and other rotary t...

Hard Composite Leather Buffing Cylinder 3/8 diameter x 11/16 inch long cylinder 1/8 inch shank Leather formed into a hard polishing cylinder For u...

3/8 x 3/4 inch Fine Flame Abrasive Buffing Point - 1/8 inch shank 9.5mm x 19mm - 3/8 x 3/4 inch  2 1/4 inches long overall 1/8 inch shank 45,370 M...

INVERTED CONE Hard Felt Bob 5/16 inch in diameter by 9/16 inch long inverted cone 3/32 inch shank For use with Dremel and other rotary tools Hard ...

Flame Shaped Hard Felt Bob 5/16 inch in diameter by 9/16 inch long 3/32 inch shank For use with Dremel and other rotary tools Hard felt is constru...

CYLINDER Hard Felt Bob 5/16 inch in diameter by 9/16 inch long cylinder 3/32 inch shank For use with Dremel and other rotary tools Hard felt is co...

CONE Hard Felt Bob 5/16 inch in diameter by 9/16 inch long flat tip cone 3/32 inch shank For use with Dremel and other rotary tools Hard felt is c...

Bud Hard Felt Bob 5/16 inch diameter by 9/16 inch long bud 3/32 inch shank For use with Dremel and other rotary tools Hard felt is constructed of ...