w20

1/32 inch Brass Collet Closeout items are non-returnable. These are on closeout because the machining isn't as nice as it should be Holds bits with...

1/16 inch Brass Collet Holds bits with a 1/16 inch shank Generic replacement for Dremel 482 collet Compatible with Dremel 225 Flex-Shaft attachmen...

Blue 600 Grit Pointed Cylinder Rubberized Polishing Point 7/32 inch in diameter by 11/16 inch long  1 7/8 inch in overall length 1/8 inch shank Fo...

Blue 600 Grit Flame Rubberized Polishing Point 7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank Removes scrat...

Cone Diamond Burr 1/8 x 9/16 inch Cone 1/8 inch shank There is some variation in the sizes of these Diamond coated accessories will cut into gla...

Green 240 Grit Rubberized Polishing Flame  7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank Removes scratches...

Yellow 80 Grit Rubberized Polishing Point 7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank For use in Dremel ...

Flame Diamond Coated Burr 1/8 x 3/8 inch flame 1/8 inch shank There is some variation in the sizes of these Diamond coated accessories will cut in...

240 Grit Rubber Polishing Wheel 3/4 inch in diameter by 7/64 inch thick wheel 1 1/2 inch in overall length 1/8 inch shank Green 240 Grit Removes s...

Green Grit Rubber Polishing Cylinder 7/16 inch in diameter by 3/4 inch long cylinder 2 inches in overall length 1/8 inch shank Removes scratches a...

Yellow 80 Grit Flame Rubberized Polishing Point 7/16 inch in diameter by 3/4 inch long  1 15/16 inch in overall length 1/8 inch shank Removes scra...

Yellow 80 Grit Rubber Polishing Cylinder 7/16 inch in diameter by 3/4 inch long cylinder 2 inches in overall length 1/8 inch shank Removes scratch...

Yellow 80 Grit Rubberized Polishing Cylinder 7/32 inch in diameter by 11/16 inch long rubber polishing cylinder 2 inches in overall length 1/8 inc...

5mm 150 Grit Cylinder Diamond Coated Burrs Sold in quantities of 2 5mm in diameter by 10mm long 1 3/4 inches in overall length 1/8 inch shank Diam...

2.3mm 40 Grit Cone Diamond Coated Burrs Sold in quantities of 2 2.3mm round ball shaped head 1 3/4 inches in overall length 1/8 inch shank Diamond...

1/32 inch Brass Collet Holds bits with a 1/32 inch shank Generic replacement for Dremel 483 collet Compatible with Dremel 225 Flex-Shaft attachmen...

5mm 150 Grit Round Diamond Coated Burrs Sold in quantities of 2 5mm round shaped head 1 3/4 inches in overall length 1/8 inch shank Diamond coated...

1.4 x 13mm 150 Grit Cone Diamond Coated Burrs Sold in quantities of 2 1.4 x 13mm cone shaped head 1 3/4 inches in overall length 1/8 inch shank D...

5.4mm 40 Grit Rounded Cylinder Diamond Coated Burrs Sold in quantities of 2 5.4mm x 10mm round end cylinder shaped head 1 3/4 inches in overall le...

Round End Inverted Cone Diamond Burrs Sold in quantities of 2 Head measures 9/32 inch in diameter by 7/16 inches wide 150 grit diamond abrasive gr...

80 Grit Rubber Polishing Wheel 3/4 inch in diameter by 7/64 inch thick wheel 1 1/2 inch in overall length 1/8 inch shank Yellow 80 Grit Removes sc...

5.3mm 80 Grit Rounded Cylinder Diamond Coated Burrs 5.3mm x 10mm round end cylinder shaped head 1 3/4 inches in overall length 1/8 inch shank Diam...

3.1mm - 1/8 inch 400 Grit Cone Diamond Burrs Sold in quantities of 2 3.1 x 12.7mm - 1/8 x 1/2 inch cone shaped head 1 3/4 inches in overall length...

3.1mm 150 Grit Round Diamond Coated Burrs Sold in quantities of 2 3.1mm round shaped head 1 3/4 inches in overall length 1/8 inch shank Diamond co...