Bench Blocks

Mini Steel Jewelers Bench Block 1 9/16 inch x 1 9/16 inch x 5/32 inch (40 x 40 x 5mm) Constructed of tempered steel May not be polished and perfectly smooth Bench blocks are used for flattening, stamping, chasing and laying out designs

Metal and Rubber Jewelers Bench Block Use the rubber or steel side of the block Comes apart for separate use Metal bench block is 2 1/2 inch x 2 1/2 inch x 1 inch thick Combined it is 2 3/4 inch x 2 3/4 inch by 1 1/4 inches thick Used for...

Jewelers Steel Bench Block 2 1/2 x 2 1/2 x 15/16 inch bench blocks Used for flattening, stamping, chasing and laying out designs Constructed of tempered steel May not be polished and perfectly smooth Previously SFE5-JT34422SSB

Jewelers Steel Bench Block 2 13/16 x 2 13/16 x 3/4 inch bench blocks Used for flattening, stamping, chasing and laying out designs Constructed of tempered steel May not be polished and perfectly smooth

Combination Metal and Rubber Jewelers Bench Block You can use the rubber or steel side Additionally, they come apart for separate use Measures about 3 3/4 inch x 3 3/4 inch x 3/4 inch thick Combined, they measure about 4 inch x 4 inch by 1 1/2 inches...

Jewelers Steel Bench Block 4 x 4 x 3/4 inch bench blocks Used for flattening, stamping, chasing and laying out designs Constructed of tempered steel May not be polished and perfectly smoothPreviously SDD4-JT34443SB

Jewelers Rubber Bench Block 4 inch x 4 inch x 3/4 inch Perfect for filing, stamping, and other detail work Rubber bench blocks have six workable sides Perfect resilience when working with wood or steel dapping punches Will not distort or leave...

Jewelers Rubber Bench Block 6 x 4 x 3/4 inch Perfect for filing, stamping, and other detail work Rubber bench blocks have six workable sides Perfect resilience when working with wood or steel dapping punches Will not distort or leave scratches...

Double Horn Jeweler's Anvil 4 1/4 x 1 1/8 x 1 11/16 inch Forged reversible anvil Rounded horn Flat horn with a hole on the top for riveting Used for flattening, shaping, forming, bending Highly polished

Hexagonal Riveting Stake15 holes and 5 slotsHoles range from about 1mm to 6mmBlock measures about 1 13/16 inches between the flats and 3/4 inch thickUse to rivet, drill and stake small partsUse to make your own head pins

Jeweler's Double Horned Anvil 4 1/4 inches long by 1 1/8 inches wide by 1 7/8 inches tall Forged reversible anvil Rounded horn Flat horn with a hole on the top for riveting Used for flattening, shaping, forming, bending, repairing Forged steel ...

Large Single Horn Jewelers Bench Anvil Wide flat horn and face For repairing, forming, shaping, bending, flattening Measures about 1.5 inch by 2.5 inch by 5 inches overallPreviously SDD5-8752JA