Clamps

Clamps

  • 2 inch Mini Hand Screw Clamp

    HAWK

    $4.97
    Mini Hand Screw Clamp 2 inch Jaws open 1.75 inches and are just over 1/4 inch wide Use the screws to adjust the tension of the clamp Can adjust the angle of the clamp by tightening one side more than the other For building models, miniatures, wood...
    BDK08-TZ7920
    $4.97
  • 2.5 inch Mini Hand Screw Clamp

    HAWK

    $5.97
    Mini Hand Screw Clamp 2 1/2 inch Jaws open 1 7/8 inches Jaws are about 1 inch long by 7/16 inch wide Use the screws to adjust the tension of the clamp Adjust angle of clamp by tightening one side more than the other For building models,...
    BEW11
    $5.97
  • 5pc Small Part Drying Strip with Suction Cups

    HAWK

    $3.79
    Small Part Drying Strip 5 clips Strip is about 12 inches long with clear suction cups on either end Alligator clips hang down from the strip Clip onto small parts for drying, painting, etc Hang using the included suction cups or on other hardware...
    BBE48-D152
    $3.79
  • 6.25 inch Right Angle Clamp Tweezer - Fiber Grips

    HAWK

    $2.97
    Right Angle Cross Lock Clamp Tweezers, Fiber Grips 6 1/4 inches long overall Heat resistant Fiber Grips 90 Degree Curved Tips Tips open about 7/8 inch Tweezers have a groove that runs perpendicular to the handle Cross lock action provides the...
    BBB53
    $2.97
  • Hand Vise - Hollow Handle

    HAWK

    $4.97
    Hand Vise - Hollow Handle Spring action jaws are about 1/2 inch wide Hole goes all the way though handle 5 inches long overall Handle is about 3/8 inch diameter Jaws open 1/8 inch Opening in handle is 3/16 inch
    BBL32-TJ7150
    $4.97