Burrs - Carbide

Cone Single Cut Carbide Burr1/8 inch shank1/4 inch diameterFor use with Dremel rotary toolsMade in USA

Double Cut End Cut Cylinder Carbide Burr 1/8 inch shank diameter 1/4 inch burr diameter Cuts on the end of the burr Double Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materials For...

Single Cut Flat End Cylinder Carbide Burr 1/8 inch shank 1/4 x 1/2 inch burr For use on hard materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as Eurotool Cut Lube Use with an 1/8 inch...

Single Cut Flat End Cylinder Carbide Burr 1/8 inch shank 1/4 x 1/2 inch burr For use on hard materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as Eurotool Cut Lube Use with an 1/8 inch...

Double Cut Round End Cylinder Carbide Burr 1/8 inch shank diameter 1/4 inch burr diameter Double Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling...

Single Cut Round End Cylinder Carbide Burr 1/8 inch shank 17/64 x 1/2 inch burr 1 7/8 inches long overall For use on hard materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as Eurotool Cut...

Double Cut Rounded Tree Carbide Burr 1/8 inch shank 1/4 inch diameter New but may not be in retail packaging Double Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materials For longer life, use...

Single Cut Rounded Tree Carbide Burr 1/8 inch shank 1/4 inch diameter New but may not be in retail packaging For use on hard materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as Eurotool...

Double Cut 1/4 x 1/2 inch Cone Carbide Burr1/8 inch shankDouble Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materialsFor longer life, use with a cooling agent such as Eurotool Cut LubeUse with...

Double Cut Flat End Cylinder Carbide Burr 1/8 inch shank 1/4 x 1/2 inch burr Double Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as...

Single Cut Flame Carbide Burr 1/8 inch shank 1/4 inch diameter New but may not be in retail packaging For use on hard materials like cast iron, steel, and other ferrous materials For longer life, use with a cooling agent such as Eurotool Cut...

Double Cut 14 degree Taper Carbide Burr1/8 inch shank1/4 inch diameterDouble Cut Carbide is used for rapid stock removal in harder materials like cast iron, steel, and other ferrous materialsFor longer life, use with a cooling agent such as Eurotool Cut...