Collets

Dremel Replacement Collet Nut Note: These may vary, having 2 or 4 flats Replacement collet nut for Dremel Rotary Tools used to tighten bits and collets into Dremel rotary tools For use with all Dremel rotary tools except Models 1, 2, and Series 1...

EZ Twist Nose Cap Wrench Dremel EZ495 The EZ Twist Nose Cap attachment makes accessory changes quick and easy  Features an integrated wrench that allows the nose cap to be used as a wrench  EZ Twist Nose Cap becomes part of your Dremel...

Dremel 90962 Collet Nut Wrench Used to remove nut to change collets Opening from flat to flat inside is 3/8 inch For use with Dremel Rotary Tools Not in retail packaging

Dremel 490 Dust Blower Fan Attachment Dremel 490 Replaces standard collet nut and stays on the tool 490 Dremel Dust Blower improves visibility by removing fine debris Great for detailed projects, sanding, engraving, and carving Can be used on the...

Dremel 483 - 1/32 inch Collet - Open Package Used to hold Bits with an 1/32 inch shank Dremel 483 but not in retail packaging The 1/32 inch collet features one small identification rings around its shank Compatible with Dremel 225 Flex-Shaft...

Dremel 483 - 1/32 inch Collet Holds bits with 1/32 inch Shanks Features one small identification ring around its shank Collets are compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series...

Dremel 482 - 1/16 inch Collet Holds bits with an 1/16 inch Shank Features two small identification rings around its shank Collets are compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and...

Dremel 481 - 3/32 inch Collet Holds bits with 3/32 inch shank 3 identification rings on shank for 3/32 inch collet Works with Dremel 225 Flex Shaft Attachement; not included For all Dremel rotary tools except Models 1, 2, Series 1 or...

Dremel 480 - 1/8 inch Collet - Open Packaged Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works with Dremel 225 Flex Shaft Attachment; not included For all Dremel rotary tools except Models 1, 2, Series 1 or...

Dremel 480 - 1/8 inch Collet Dremel 480 1/8 inch Collet Holds bits with 1/8 inch shank The 1/8 inch collet does not have identification rings Works with Dremel 225 Flex Shaft Attachment; not included For all Dremel rotary tools except Models...

Dremel 4485 Collet and Nut Set 5 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Collet Nut is for use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier Models 260, 270 ,280, and 380-5 For use...

4 piece Brass Collet Set 4 piece set 1/32 inch collet 1/16 inch collet 3/32 inch collet 1/8 inch collet Replacement for Dremel 480, 481, 482, and 483 Collets For use in Dremel rotary tools Bulk packaged

1/32 inch Brass Collet Closeout items are non-returnable. These are on closeout because the machining isn't as nice as it should be Holds bits with a 1/32 inch shank Generic replacement for Dremel 483 collet Compatible with Dremel 225 Flex-Shaft...

1/8 inch Brass Collet. Replacement for Dremel 480. Used to hold Bits with a 1/8 inch Shank. For use with Dremel type rotary bits that have a 1/8 inch shank. Not in retail packaging.

1/8 inch Aluminum Collet For use with rotary bits that have a 1/8 inch shank Generic replacement for Dremel 480 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier...

1/8 inch Aluminum Collet For use with rotary bits that have a 1/8 inch shank Generic replacement for Dremel 480 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier...

3/32 inch Steel Collet For use with Rotary bits that have a 3/32 inch shank Generic replacement for Dremel 481 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier...

3/32 inch Brass Collet Holds bits with a 3/32 inch shank Generic replacement for Dremel 481 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier of Models 260, 270...

1/16 inch Brass Collet Holds bits with a 1/16 inch shank Generic replacement for Dremel 482 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier of Models 260, 270...

1/32 inch Brass Collet Holds bits with a 1/32 inch shank Generic replacement for Dremel 483 collet Compatible with Dremel 225 Flex-Shaft attachment For use with all Dremel rotary tools except Models 1, 2, and Series 1 or earlier of Models 260, 270...