Tile and Grout

Carbide Tip Masonry Drill Bit 1/8 inch shank For rotary drilling in block and other masonry materials Can be used in a Dremel rotary tool or regular drill Drills up to twice as fast Packaging may vary

Compare to Dremel 562 - Carbide Bit for Cutting Tile 1/8 inch shank Most have a protective wax coating and are marked 'Irwin 1/8' Similar to Dremel 562 but not in retail packaging Use to cut wall tile to fit around fixtures Cut cement board or...

Compare to Rotozip RZ125 Carbide Bit 1/8 inch diameter 1/8 inch shank May have a protective wax coating and marked Irwin 1/8 inch For use with Rotozip tools Not in retail packaging Previously SGQ9-RZ125

Dremel 562 - Carbide Tile Cutting Bit 1/8 inch shank Ideal for shaping ceramic wall tile around fixtures or plumbing pipes You can also create decorative wall tile by cutting a design and filling it with colored grout Also cuts cement board and...

Dremel 565/566 Cutting Adapter Guides cutting path Keeps bits at the proper angle Attaches easily in place of the housing cap Depth adjustment up to 3/4 inch/19mm, markings may vary For use with corded Dremel Rotary Tools and 9.6V Cordless...

Dremel 566 Cutting Adapter 566 cutting adapter Carbide tile bit Instructions Not for floor tile Keeps bits at the proper angle Depth adjustment up to 3/4 inch (19mm) Guides cutting path Attaches easily in place of housing cap For use with...

Dremel 566 Wall Tile Cutting Kit Includes 566 Cutting Guide, 562 Carbide Tile Cutting Bit and Instructions Use to cut wall tile, cement board and plaster Easily cut around fixtures or plumbing Cut shapes from tile and fill with grout to make...

Dremel 568 Grout Removal Kit Kit includes: 568 Grout Removal Attachment, 569 1/16 inch Carbide Grout Removal Bit and Instructions 30 degree cutting angle Controlled cutting along the grout line Special guides keep the bit centered between...

Dremel 569 Carbide Grout Removal Bit Dremel 569 1/16 inch diameter 1/8 inch shank Use for wall and floor grout For removing grout to replace grout or broken tiles For use in Dremel rotary tools 1/8 inch shank

Dremel 570 - 1/8 inch Carbide Grout Removal Bit Dremel 570 1/8 inch (3.2mm)diameter 1/8 inch shank Maximum 18,000 rpm Do not use with a single speed MMultiPro rotary tool Use for removing grout to replace grout or broken tiles Easily remove both...

Rotozip RZ125 Carbide Tile Cutting Bit 1/8 inch shank Allows you to cut ceramic wall tile (only soft tile with glazing), cement board, stucco and plaster Not in retail packaging