Products

Dremel Detail Abrasive Brush, 120 Grit Dremel EZ472SA 1 inch diameter 3 layers of rubber brush material about 1/8 inch thick Medium 120 Grit Rubbe...

Dremel Detail Abrasive Brush, 220 Grit Dremel EZ473 1 inch diameter 3 layers of rubber brush material about 1/8 inch thick Fine 220 Grit Rubber br...

Dremel EZ Lock 1 1/2 inch Plastic Cutting Cut-off Wheels, 5pc Dremel EZ476 5 piece package 1 1/2 inch diameter Cut-off wheel designed specifically...

Dremel EZ511HP 180 & 280 Grit Finishing Abrasive Buff At least 4X longer life compared to the Dremel 511E Longer life achieved by adding 10...

Dremel EZ Lock Grinding Wheel, 2pc Dremel EZ541GR 2 per package The only Dremel accessory designed to flush-grind a surface Unique domed shape and...

Dremel EZ Lock Diamond Wheel Dremel EZ545 1 1/2 inch diameter Diamond disc has breathing holes for reduced heat and less debris during use Straigh...

Dremel EZ545HP High Performance EZ Lock Diamond Wheel The Max Life EZ545HP diamond wheel is engineered to last 3X longer compared to compared to ...

Dremel Flex Shaft Driver Cap Square hole to mate up with the square drive of a Dremel attachment Use with the 225 Flex Shaft, 670 Mini Saw or 575 R...

Dremel Max-Life 115HP -5/16 inch CYLINDER Cutter 2 cutters per package 5/16 inch (7.9mm) diameter cylinder shaped cutter 1/8 inch shank Dremel's...

Dremel Max-Life 9901HP - 1/8 inch Cylinder Tungsten Carbide Cutter Dremel 9901HP  1/8 inch diameter cylinder 1/8 inch shank The Max Life 9901HP ...

Dremel Max-Life 9903HP - 1/8 inch Round End Cylinder Cutter 1/8 inch shank The Max Life 9903HP tungsten carbide carving bit is coated in titanium...

Replacement screw for the Dremel 670-01 Mini Saw AttachmentRequires Dremel 670 Mini Saw Attachment, which is not included

Dremel Replacement Collet Nut Note: These may vary, having 2 or 4 flats Replacement collet nut for Dremel Rotary Tools used to tighten bits and col...

10pc Dremel SD60-PGA EZ Lock 60 grit Pet Nail Trimming Discs Dremel SD60-PGA Packaged as a pet product, but are the same as EZ411, but smaller. Al...

Dremel T-Handle Hex Wrench 9/64 inch From Dremel Scroll Saw Adapter Kits Intended for use when changing blades on Dremel Scroll Saws Could be used...

Dust Blower Rubber bulb with a brass nozzle Nozzle may be chrome plated or vary slightly from picture Thin nozzle points a precise high-velocity pu...

Ellipse / Oval Drawing Template Draw 27 ovals/ellipses from 2mm to 50mm The largest oval is 2.75 x 1.5 inches The smallest oval is 3/8 x 1/4 inch ...

Elmer's Craft Bond Tape Runner, Permanent Elmer's E4006 0.31 inches wide x 26.25 feet long High tack clear adhesive Permanent bond Acid free Photo...

Permanent Dot Runner Refills Elmer's Craft Bond E4011 2 refills per pack 0.31 inches wide x 26.25 feet long Dots are very small approximately 1mm d...

Elongated Blackhead Remover - Double End Wire end and flat end get them all Wire end is 1/8 inch wide Flat end is 13/64 inches wide 4 3/8 inches l...

EUROTOOL BUR-180.00 Cut Lube Extends the life of burs, cutters, drills, gravers, saw blades, etc. Helps keep tools sharp Reduces friction, chatter,...

Blade Block EUROTOOL SAW-310.02 Includes nut, pad, washer, and wing nut Replacement for EUROTOOL SAW-333.01 and SAW-334.01 jeweler's saw frames

Tension Wing Nut EUROTOOL SAW-310.05 Wing nut for tightening jeweler's saw blades Replacement for EUROTOOL SAW-333.01 and SAW-334.01 jeweler's saw...

Blade Pad For Jeweler's Saw EUROTOOL SAW-310.08 Replacement blade pad Fits Eurotool SAW-333.01 and SAW-334.01 jeweler's saw frames