Products

Dremel Max-Life 9901HP - 1/8 inch Cylinder Tungsten Carbide Cutter Dremel 9901HP  1/8 inch diameter cylinder 1/8 inch shank The Max Life 9901HP ...

Dremel Max-Life 9903HP - 1/8 inch Round End Cylinder Cutter 1/8 inch shank The Max Life 9903HP tungsten carbide carving bit is coated in titanium...

Replacement screw for the Dremel 670-01 Mini Saw AttachmentRequires Dremel 670 Mini Saw Attachment, which is not included

Dremel Replacement Collet Nut Note: These may vary, having 2 or 4 flats Replacement collet nut for Dremel Rotary Tools used to tighten bits and col...

10pc Dremel SD60-PGA EZ Lock 60 grit Pet Nail Trimming Discs Dremel SD60-PGA Packaged as a pet product, but are the same as EZ411, but smaller. Al...

Dremel T-Handle Hex Wrench 9/64 inch From Dremel Scroll Saw Adapter Kits Intended for use when changing blades on Dremel Scroll Saws Could be used...

Dust Blower Rubber bulb with a brass nozzle Nozzle may be chrome plated or vary slightly from picture Thin nozzle points a precise high-velocity pu...

Ellipse / Oval Drawing Template Draw 27 ovals/ellipses from 2mm to 50mm The largest oval is 2.75 x 1.5 inches The smallest oval is 3/8 x 1/4 inch ...

Elmer's Craft Bond Tape Runner, Permanent Elmer's E4006 0.31 inches wide x 26.25 feet long High tack clear adhesive Permanent bond Acid free Photo...

Elmer's Craft Bond Permanent Tape Runner, Refill Elmer's E4007 2 refills per pack Each one is 0.31 inches wide x 26.25 feet long High tack clear ad...

Permanent Dot Runner Refills Elmer's Craft Bond E4011 2 refills per pack 0.31 inches wide x 26.25 feet long Dots are very small approximately 1mm d...

Elongated Blackhead Remover - Double End Wire end and flat end get them all Wire end is 1/8 inch wide Flat end is 13/64 inches wide 4 3/8 inches l...

EUROTOOL BUR-180.00 Cut Lube Extends the life of burs, cutters, drills, gravers, saw blades, etc. Helps keep tools sharp Reduces friction, chatter,...

Blade Block EUROTOOL SAW-310.02 Includes nut, pad, washer, and wing nut Replacement for EUROTOOL SAW-333.01 and SAW-334.01 jeweler's saw frames

Tension Wing Nut EUROTOOL SAW-310.05 Wing nut for tightening jeweler's saw blades Replacement for EUROTOOL SAW-333.01 and SAW-334.01 jeweler's saw...

Blade Pad For Jeweler's Saw EUROTOOL SAW-310.08 Replacement blade pad Fits Eurotool SAW-333.01 and SAW-334.01 jeweler's saw frames

Excel K4 Aluminum Swivel Knife Handle Excel 16004 Rotates 360 degrees for easy, intricate cutting of paper and film Handle includes a textured gri...

Excel K7 Carving Knife Handle Excel 16007 K7 knife handle 4 jaw machined chuck for secure blade positioning Includes safety cap and Excel 20101 #1...

Excel K4 Aluminum Swivel Knife Handle Excel 16004 Rotates 360 degrees for easy cutting of paper and film Handle includes a textured grip, allowing...

Excel Black Executive Retractable Hobby Knife Excel 16047 Includes pocket clip for secure storage A special switch at the top of the handle that a...

Excel 8 Part Snap-off Utility Blades Excel 20007 5 piece package 8 segments per blade Constructed of carbon steel coated with a thin layer or oil ...

5pc Excel Number 2 Long Straight Edge Knife Blades Excel 20002 5 piece package 1 3/4 long x 3/8 wide x 1 1/8 inch Edge #2 blades have a similar pr...

5pc Excel No 5 Narrow Angled Chisel Knife Blades Excel 20005 5 per package #5 angled straight edge blades Size: 1 3/8 x 1/4 x 3/8 inch Edge Constr...

5pc Excel Stencil Edge Blade Excel 20006 5 per package Constructed of carbon steel coated with a thin layer or oil to inhibit rust Cuts paper, car...