w20

3.3mm - 17/128 inch 240 Grit Rounded Cylinder Diamond Burrs Sold in quantities of 2 3.3 x 6.4mm - 17/128 x 5/16 inch round end cylinder shaped hea...

2.3mm - 3/32 inch 240 Grit Rounded Cylinder Diamond Burrs Sold in quantities of 2 2.3 x 6.4mm - 3/32 x 1/4 inch round end cylinder shaped head 1 3...

2mm - 5/64 inch 240 Grit Rounded Cylinder Diamond Burrs - 1/8 inch shank Sold in quantities of 2 2 x 6.4mm - 5/64 x 1/4 inch round end cylinder sh...

2.9mm - 15/128 inch 240 Grit Cylinder Diamond Burrs Sold in quantities of 2 2.9 x 7.9mm - 15/128 x 5/16 inch cylinder shaped head 1 3/4 inches in ...

2.0 x 3.5mm Cylinder 150 Grit Grit Diamond Bur - 3/32 inch shank 2.0mm Diameter by 3.5mm long Cylinder Shaped Diamond Bur 150 Grit 3/32 inch shank...

3.2 x 6.5mm Cylinder 150 Grit Grit Diamond Bur - 3/32 inch shank 3.2mm Diameter by 6.5mm long Cylinder Shaped Diamond Bur 150 Grit 3/32 inch shank...

1.8 x 8.0mm Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.8mm Diameter by 8.0mm long Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recomme...

1.8 x 4.0mm Cone 150 Grit Grit Diamond Bur - 3/32 inch shank 1.8mm Diameter by 4.0mm long Cone Shaped Diamond Bur 150 Grit 3/32 inch shank Recomme...

1.9 x 6.6mm Flame 150 Grit Grit Diamond Bur - 3/32 inch shank 1.9mm Diameter by 6.6mm long Flame Shaped Diamond Bur 150 Grit 3/32 inch shank Recom...

Jewelers Steel Bench Block 2 13/16 x 2 13/16 x 3/4 inch bench blocks Used for flattening, stamping, chasing and laying out designs Constructed of t...

Keystone 300300 Cup Shaped Separating Discs 100 piece 3/4 inch diameter discs 1/16 inch hole Use with 1/16 inch screw mandrel; not included Doubl...

13/32 inch White Inverted Cone Grinding Stone 10.3 x 5.6mm - 13/32 inch diameter x 7/32 inch long inverted cone 1 3/4 inches long overall 1/8 inch...

Medium Felt Round End Inverted Cone 5/16 x 1/2 inch felt bob 3/32 inch shank For use with Dremel and other rotary tools Use for general polishing ...

Tension Wing Nut EUROTOOL SAW-310.05 Wing nut for tightening jeweler's saw blades Replacement for EUROTOOL SAW-333.01 and SAW-334.01 jeweler's saw...

1.8mm - 5/64 inch 400 Grit Cone Diamond Burrs - 1/8 inch shank Sold in quantities of 2 5/64 x 3/16 inch (1.8 x 4.7mm) flat end cone shaped head 1 ...

3/8 Hard Felt Inverted Cone 3/8 diameter x 9/16 inch long inverted cone 3/32 inch shank For use with Dremel and other rotary tools Hard felt is go...

1.7mm Knife Edge Wheel Tungsten Vanadium Steel Cutter 1.7mm diameter knife edge wheel cutter 1 3/4 inches in overall length 3/32 inch shank For us...

5 piece 7/16 inch in diameter black silicon carbide grinding wheel Silicon Carbide stones are used for non ferrous metals like aluminum and brass ...

5/64 inch 150 Grit Flat End Cone Diamond Coated Burrs Sold in quantities of 2 5/64 x 9/32 inch (2 x 7 mm) flat end cone shaped head 1/8 inch shank...

3/16 inch Cone Grinding Stones Sold in quantities of 2 3/16 inch diameter x 3/16 inch long 1/8 inch shank For use in Dremel and other rotary tools...

1.6 mm Flame Diamond Coated Burr 1.6mm flame cone diamond point Medium - approximately 150 Grit / 107-126 microns 3/32 inch shank For use with Dre...

1/8 inch Cone Simonds Rotary File 1/8 inch diameter x 1/2 inch long cone shaped rotary file 1/8 inch shank For use in Dremel and other rotary tool...